Century Eliminator X80 Fixed Spool Rod

Gearbox design butt and autoclave construction – Century cure the blank in an autoclave, like parts for fighter jets. This squeezes out extra resin. You get a rod that is lighter, more powerful, and does not go floppy after a year of hard fishing. Spread Tow Fabric (STF) carbon blank – The carbon fibres are woven flat, not lumpy. This stops the rod twisting when you load it up. The tip is left raw (unground) so you feel tiny knocks that other rods hide. Compound Tapered Butt with Overlap Joint – The rod bends in one smooth curve from the handle to the tip. There is no sudden "stiff spot". It loads like a high-end tournament rod but stays controllable. Factory-fitted American Tackle Titanium K Guides – These frames are twisted to stop line slap. They are fully saltwater proof. Braid will not cut grooves into them. Mono runs through them like glass. Specifically rung for fixed spool reels – Century did not just copy a multiplier rod. The guide spacing is engineered for the way a fixed spool peels line off the spool. Less friction. Fewer wind knots. More yards. Turquoise underwrap with silver inlays and jet black tipping – That classic Eliminator look. Each wrap is hand-finished and sealed. It turns heads on the beach. Marine-grade etched stainless steel trim band at lower butt – Protects the blank when you lean the rod on rocks or concrete. It will never rust. It also looks the part. Japanese Shrink Rubber (JSR) handle – When your hands are wet and covered in fish slime, this grip locks in. It does not spin around the blank like cheap cork. JSR separator grip at the joint area – Gives you a positive place to put your hand when you are casting or carrying the rod over your shoulder. Also protects the delicate joint from knocks. Reflective tape fitted to the blank at the top guides – Shine a head torch down the beach and you will instantly see your rod tip. No more fumbling in the dark. Century carbon butt reducer (optional extra) – Screws into the butt. Lowers the balance point. Useful if you pendulum cast or need extra leverage to bully fish out of heavy surf. Century DPS sliding reel seat – Move the reel up or down as much as you want. High for pendulum power. Low for comfort. It fits every fixed spool foot size. Century padded rod case with internal partition – Holds both rod sections separately. Heavy-duty zip. Reinforced ends. It survives van doors and train carriages. Designed and hand-manufactured in the United Kingdom – Built in Century’s own UK factory. British materials. British hands. Not mass-produced overseas.

Century Eliminator X100 Surf Rod 14' 6" / 125-225g

Gearbox Design Butt with Autoclave Technology – Precision-engineered for performance Spread Tow Fabric (STF) Blank Finish – Tip features unground natural carbon and STF Compound Tapered Butt with Overlap Joint – Enhanced strength and action American Tackle Titanium K Guides – Factory-fitted for durability and smooth performance Turquoise Underwrap with Silver Inlays & Jet Black Tipping – Premium aesthetics Marine-Grade Etched Stainless Steel Trim Band – Stylish and durable lower butt detail Japanese Shrink Rubber (JSR) Handle – Comfortable and secure grip JSR Rubber Separator Grip at Joint Area – Reinforced handling and balance Reflective Tape on Blank at Top Guides – Improved visibility in low light Optional Century Carbon Reducer – Customizable performance upgrade Century DPS Sliding Reel Seat – Secure and adjustable reel positioning Included Century Padded Rod Case with Partition – Premium protection and storage Designed and Manufactured in the United Kingdom – Quality craftsmanship and heritage

Century Eliminator X90 Surf Rod 14' 6" / 125-200g

Gearbox Design Butt with Autoclave Technology – Precision-engineered for performance Spread Tow Fabric (STF) Blank Finish – Tip features unground natural carbon and STF for durability Compound Tapered Butt with Overlap Joint – Enhanced strength and action American Tackle Titanium K Guides – Premium factory-fitted guides for smooth performance Turquoise Underwrap with Silver Inlays & Jet Black Tipping – Sleek, high-visibility aesthetics Marine-Grade Etched Stainless Steel Trim Band – Durable lower butt detailing Japanese Shrink Rubber (JSR) Handle – Comfortable, non-slip grip JSR Rubber Separator Grip at Joint Area – Reinforced handling comfort Reflective Tape on Blank at Top Guides – Improved visibility in low light Optional Century Carbon Reducer – Customizable balance and feel Century DPS Sliding Reel Seat – Secure, adjustable reel positioning Included Century Padded Rod Case with Partition – Premium protection for transport/storage Designed & Manufactured in the United Kingdom – Quality craftsmanship guaranteed

Century Eliminator X80 Surf Rod 13' 6" / 125-200g

Gearbox Design Butt with Autoclave Technology – Precision-engineered for performance Spread Tow Fabric (STF) Blank Finish – Tip features unground natural carbon and STF for durability Compound Tapered Butt with Overlap Joint – Enhanced strength and seamless transitions American Tackle Titanium K Guides (Factory Finish) – Lightweight and corrosion-resistant Turquoise Underwrap with Silver Inlays & Jet Black Tipping – Sleek, high-end aesthetics Marine-Grade Etched Stainless Steel Trim Band – Premium detailing at the lower butt Japanese Shrink Rubber (JSR) Handle – Comfortable, non-slip grip JSR Rubber Separator Grip at Joint Area – Reinforced protection and balance Reflective Tape on Blank at Top Guides – Improved visibility in low light Optional Century Carbon Reducer – Customizable performance upgrade Century DPS Sliding Reel Seat – Secure, adjustable reel positioning Includes Century Padded Rod Case with Partition – Premium protection for storage/transport Designed & Manufactured in the UK – Quality craftsmanship and engineering

Century Fireblade 13ft Rod

Multi-phase high tensile composite butt with 3K-3K carbon twill cut at 45 bias. Tip - reverse fit joint and glass/high tensile carbon, hybrid, rapid recovery tip. Computer-controlled proprietary oven cure technology. Factory Finish: Matt black coated, stainless steel Delta forward sloping, anti-tangle guides. Guides set in hybrid configuration for fixed spool or multiplier use. Tied in red metallic tips(butt) and Jet-Black grade A grade thread with multi coats of high build. Marine grade etched stainless steel trim band – upper butt. Japanese shrink rubber (JSR) handle. JSR rubber separator grip on lower tip and upper butt. Equal sections – tip and butt. Century Fuji moveable reel seat and EVA caps.

Century GT Fireblade

Butt: Advanced multi-phase carbon composite featuring a 3K-3K upper sheath twill, angled at a 45-degree bias. Tip: Designed with a reverse-fit joint and a sensitive glass tip for exceptional bite detection. Utilizes a computer-regulated oven cure process for optimal results. Features matt black-coated, stainless steel Delta guides that are forward-tilted to prevent tangling. Guides are arranged in a hybrid layout suitable for both fixed spool and multiplier reels. Adorned with a marine-grade stainless steel trim band on the upper butt section. Accents include red metallic tips on the butt and high-quality Jet-Black thread, sealed with multiple layers of protective coating. Equipped with a Japanese shrink rubber (JSR) handle for a comfortable grip. JSR rubber grips are also present on the lower tip and upper butt sections. Both the tip and butt are of equal length for balance. Comes with a Century Fuji adjustable reel seat (size 24) and cushioned EVA end caps. Each rod is accompanied by a protective Century cloth bag.

Century Fireblade Surf Rod 13' 4-6oz

Multi-phase high tensile composite butt with 3K-3K carbon twill cut at 45 bias. Tip - reverse fit joint and glass/high tensile carbon, hybrid, rapid recovery tip. Computer-controlled proprietary oven cure technology. Factory Finish: Matt black coated, stainless steel Delta forward sloping, anti-tangle guides. Guides set in hybrid configuration for fixed spool or multiplier use. Tied in red metallic tips(butt) and Jet-Black grade A grade thread with multi coats of high build. Marine grade etched stainless steel trim band – upper butt. Japanese shrink rubber (JSR) handle. JSR rubber separator grip on lower tip and upper butt. Equal sections – tip and butt. Century Fuji moveable reel seat and EVA caps.

Century Eliminator T1200 Shore Rod

14ft 10in, 4.52m Two equal sections Factory Finish: Fuji Titanium K Guides Casting weight 8oz, 225g Marine grade etched stainless steel trim bands – upper and lower butt Japanese shrink rubber (JSR) handle JSR rubber separator grip on lower tip and upper butt Century partition rod case

Century Eliminator T700 SGT Shore Rod

15ft, 4.57m Two equal sections Factory Finish: Fuji Titanium K Guides SGT Glass Tip Easy Casting Casting weight 6oz 175g Marine grade etched stainless steel trim bands – upper and lower butt Japanese shrink rubber (JSR) handle JSR rubber separator grip on lower tip and upper butt Century partition rod case

Century Eliminator Rod T800 13ft 6in

Gearbox Design butt and Autoclave Technology Blank colour: Butt – Spread Tow Fabric. Tip – Black Gloss Factory Finish: American Tackle Titanium K Guides Tied in Aqua metallic under wraps and jet black with silver trims Marine grade etched stainless steel trim bands – upper and lower butt Japanese shrink rubber (JSR) handle JSR rubber separator grip on lower tip and upper butt 3M Reflective tape – top guides Century carbon reducer available as optional extra Century / Fuji DPS sliding reel seat – coaster not needed, locks to blank just by tightening Fuji hood Century partition rod case 13ft 6in in length Casts 100-175g

Century Eliminator T900

Gearbox Design butt and Autoclave Technology Blank colour: Butt – Spread Tow Fabric. Tip – Black Gloss Factory Finish: American Tackle Titanium K Guides Tied in blue metallic under wrap and jet black with gold trims Marine grade etched stainless steel trim bands – upper and lower butt Japanese shrink rubber (JSR) handle JSR rubber separator grip on lower tip and upper butt 3M Reflective tape – top guides Century carbon reducer available as optional extra Century / Fuji DPS sliding reel seat – coaster not needed, locks to blank just by tightening Fuji hood Century partition rod case Length – 14' 4". Casting Ratio – 125-200g.  

Century Eliminator T1000 Shore Rod

Gearbox Design - Autoclave Technology – High performance Resin – Spread Tow Fabric Factory Finish: Fuji K Guides Tied in metallic red and jet black white trim bands. Marine grade etched stainless steel trim bands – upper and lower butt Japanese shrink rubber (JSR) handle JSR rubber separator grip on lower tip and upper butt 3M Reflective tape – top guides Optional Century carbon reducer (not included) Century sliding reel seat with integrated Coaster Century partition rod case Length 14ft 10in Casting weight 4 to 8oz  

Century Kompressor Rod SS

The Gearbox Design butt and Autoclave Technology provide enhanced strength and resilience. The rod features a 3K-3K carbon twill blank color in the upper butt, and an unground UD carbon tip for added toughness. The rod is factory finished with American Tackle Titanium K Guides for superior line management. The rod is tied in a combination of Aquamarine and Jet Black, adding to its aesthetic appeal. The upper and lower butt are adorned with marine-grade etched stainless steel trim bands. The handle is made from Japanese Shrink Rubber (JSR) for a firm and comfortable grip. JSR rubber separator grip on the lower tip and upper butt. The top guides feature 3M Reflective tape for visibility in low-light conditions. The rod is compatible with a Century carbon reducer, available as an optional extra, for further casting reach and power. The rod features a Century / Fuji DPS sliding reel seat. There's no need for a coaster as it locks to the blank just by tightening the Fuji hood. The rod comes with a Century partition rod case for easy transportation and storage. The rod measures 13' 10" in length and offers a casting ratio of 125-200g, making it versatile for a range of fishing situations.